|
LION SEAL 7300 | LION SEAL 7300W | LION SEAL 7500 | LION SEAL 7600
LION SEAL 7600WG/P | LION SEAL-PSB 860 | LION SEAL-GTR 958 GAR 921 |
|
|
|
|
LION SEAL 7300
¾ÐÃà ºñ¼®¸éÆÇ |
|
|
|
Typical Physical Propertiese
- Color : Ultramarine / Fibers : Aramid / Binder : NBR
- Pressure : 30kgf/§².
- Temperature : 350¡É max.
- Good resistance to Hot Oil / Fuels / Water
- Water, Alkalis, Salt Solution : 30kgf/§², 200¡É max
- Organic Solvent : 20kgf/§², 200¡Émax
- Hot Oil, Oil Gas, Freon Gas : 20kgf/§² 200¡Émax
- PH Range : 4-11 |
Standard Sizes
- Sheet Size : 1270mm¡¿1270mm / 1270mm¡¿3850mm
1270mm¡¿2540mm / 2540mm¡¿3850mm
- Thickness : 0.5mm / 0.8mm / 1.0mm
1.5mm / 2.0mm / 3.0mm
- Tolerance : Thickness : £¼1mm¡¾0.1mm, ¡Ã1mm¡¾10%
Length : ¡¾50mm, Width : ¡¾50mm |
Technical Data
Description |
Unit |
Value |
Typical values (Thickness 1.5mm) |
|
|
Density |
g/§¨ |
1.5~1.7 |
Tensile Strength |
kgf/§± |
1.4mm |
Ignition Loss |
% |
38 max |
Compressibility |
% |
7~17 |
Recovery |
% |
40 |
ASTM |
Thickness Increase |
% |
15 |
Oil #3 |
Tensile Loss |
% |
45 |
ASTM |
Thickness Increase |
% |
15 |
Fuel B |
Weight Increase |
% |
15 |
Flexibility (F¡Â12) |
- |
No Break |
¡ØAil data are typical values
¡Ø»ó±â¹°¼ºÄ¡´Â ±Ô°ÝÄ¡°¡ ¾Æ´Ñ ´ëǥġÀÓ. |
Pressure/Temperature Operating Guidelines
|
Characteristic
¿ì¼öÇÑ Ç°ÁúÀÇ ºñ¼®¸é ¼¶À¯¿Í ³»À¯¼ºÀÌ ¶Ù¾î³ ÇÕ¼º°í¹«¸¦ »ç¿ëÇÏ¿©
±â¸§¿¡ ƯÈ÷ ¾ÈÁ¤ÀûÀ̸ç Seal¼ºÀÌ ¿ì¼öÇÑ ºñ¼®¸é ½ÃÆ®ÀÔ´Ï´Ù.
This is manufactured by the hot calender process using high
quality non-asbestos fibers and oil resistant synthetic rubber.
Specially, this sheet has oil superior sealibility with excellent oil
resistance. |
Aramid Fiber/¾Æ¶ó¹Ìµå ¼¶À¯
Aramid fiber reinforced gaskets are simply
applied everywhere, So in the chemical industry,
power plants, automobiles, etc. These composite
materials mainly consist of reinforcing
fibers, fillers and rubber, Aramid fibers have considerable influence
on the proccessing of gasket materials and their properties. |
|
|
|
|
|
|
|
|
|
|
LION SEAL 7300W
±Ý¸ÁÀÔ ¾ÐÃà ºñ¼®¸éÆÇ |
|
|
|
Typical Physical Propertiese
- Color : Ultramarine / Fibers : Aramid / Binder : NBR
- Pressure : 100kgf/§² max
- Temperature : 400¡É max.
- Suitable For Water / Hot Oil / Oil Gas /Alkali
- Salt Solutions / Solvents / Etc
- Not be Use In Steam / Strong Acid and Alkali
- Alkali Soluble Chemicals. |
Standard Sizes
- Sheet Size : 1270mm¡¿1270mm / 1270mm¡¿3850mm
1270mm¡¿2540mm / 2540mm¡¿3850mm
- Thickness : 1.0mm / 1.5mm / 2.0mm / 3.0mm
- Tolerance : Thickness : £¼1mm¡¾0.1mm, ¡Ã1mm¡¾10%
Length Width : ¡¾50mm |
Technical Data
Description |
Unit |
Value |
Typical values (Thickness 1.5mm) |
|
|
Density |
g/§¨ |
1.7~2.0 |
Tensile Strength |
kgf/§± |
1.4mm |
Ignition Loss |
% |
38 max |
Compressibility |
% |
7~17 |
Recovery |
% |
40 |
ASTM |
Thickness Increase |
% |
15 |
Oil #3 |
Tensile Loss |
% |
45 |
ASTM |
Thickness Increase |
% |
15 |
Fuel B |
Weight Increase |
% |
15 |
Flexibility (F¡Â12) |
- |
No Break |
¡ØAil data are typical values
¡Ø»ó±â¹°¼ºÄ¡´Â ±Ô°ÝÄ¡°¡ ¾Æ´Ñ ´ëǥġÀÓ. |
Pressure/Temperature Operating Guidelines
|
Characteristic
¿ì¼öÇÑ Ç°ÁúÀÇ ºñ¼®¸é ¼¶À¯¿Í ³»À¯¼ºÀÌ ¶Ù¾î³ °í¹«¸¦ »ç¿ëÇÏ¿©
½ÃÆ® ³»ºÎ¿¡ ½ºÅ×Àη¹½º ±Ý¸ÁÀ» ³Ö¾î ¸¸µç °í¿Â, °í¾Ð¿¡ ¿ì¼öÇÑ ±Ý¸ÁÀÔ ºñ¼®¸é ½ÃÆ®ÀÔ´Ï´Ù.
This is an excellent quality asbestos free gasket material with stainless steel wire-mash inserted to be suitable for high temperature and high pressured, manufactured by the calender process using high quality non-asbestos fibers and oil-resistant rubber. |
Aramid Fiber/¾Æ¶ó¹Ìµå ¼¶À¯
Aramid fiber reinforced gaskets are simply
applied everywhere, So in the chemical industry,
power plants, automobiles, etc. These composite
materials mainly consist of reinforcing
fibers, fillers and rubber, Aramid fibers have considerable influence
on the proccessing of gasket materials and their properties. |
|
|
|
|
|
|
|
|
|
LION SEAL 7500
¾ÐÃà ºñ¼®¸éÆÇ |
|
|
|
Typical Physical Propertiese
- Color : Ultramarine / Fibers : Aramid / Binder : SBR
- Pressure : 30kgf/§² max
- Temperature : 350¡É max.
- Good resistance to Hot Oil / Fuels / Water
- Water, Alkalis, Salt Solution : 30kgf/§², 200¡É max
- Organic Solvent : 20kgf/§², 150¡É max
- Hot Oil, Oil Gas, Freon Gas : 20kgf/§² 200¡Émax |
Standard Sizes
- Sheet Size : 1270mm¡¿1270mm / 1270mm¡¿3850mm
1270mm¡¿2540mm / 2540mm¡¿3850mm
- Thickness : 0.5mm / 0.8mm / 1.0mm
1.5mm / 2.0mm / 3.0mm
- Tolerance : Thickness : £¼1mm¡¾0.1mm, ¡Ã1mm¡¾10%
Length : ¡¾50mm, Width : ¡¾50mm |
Technical Data
Description |
Unit |
Value |
Typical values (Thickness 1.5mm) |
|
|
Density |
g/§¨ |
1.5~1.7 |
Tensile Strength |
kgf/§± |
1.4mm |
Ignition Loss |
% |
38 max |
Compressibility |
% |
7~17 |
Recovery |
% |
40 |
ASTM |
Thickness Increase |
% |
15~40 |
Oil #3 |
Tensile Loss |
% |
70 |
ASTM |
Thickness Increase |
% |
10~30 |
Fuel B |
Weight Increase |
% |
40 MAX |
Flexibility (F¡Â12) |
- |
No Break |
¡ØAil data are typical values
¡Ø»ó±â¹°¼ºÄ¡´Â ±Ô°ÝÄ¡°¡ ¾Æ´Ñ ´ëǥġÀÓ. |
Pressure/Temperature Operating Guidelines
|
Characteristic
Á¾·¡ÀÇ ¾ÐÃà ¼®¸éÆÇ°ú µ¿ÀÏÇÑ °øÁ¤À¸·Î ¾Ð¿¬ °¡¿, ¼ºÇüÇÑ °ÍÀ¸·Î ³»¿¼º ÇÕ¼º°í¹«ÀÎ SBR°ú ºñ¼®¸é ¼¶À¯¸¦ »ç¿ëÇÑ °ÍÀ¸·Î ³»¿¼º ¹× º¹ÇÕ¼ºÀÌ ¶Ù¾î³ ºñ¼®¸é GASKET¿¡ ÀûÇÕÇÑ SheetÀÌ´Ù.
This asbestos free jointing sheet is designed specifically perform and seal more effectively than other asbestos free gasketing materials. This sheet provides superior heat resistance and excellent recovery becuase of unique blends of synthetic fibers, fillers and SBR biner. |
Aramid Fiber/¾Æ¶ó¹Ìµå ¼¶À¯
Aramid fiber reinforced gaskets are simply
applied everywhere, So in the chemical industry,
power plants, automobiles, etc. These composite
materials mainly consist of reinforcing
fibers, fillers and rubber, Aramid fibers have considerable influence
on the proccessing of gasket materials and their properties. |
|
|
|
|
|
|
|
|
|
LION SEAL 7600
¾ÐÃà ºñ¼®¸éÆÇ |
|
|
|
Typical Physical Propertiese
- Color : Black / Binder : NBR
- Pressure : 60kgf/§² max
- Temperature : 480¡É max.
- Fibers : Carbon Fiber + Aramid Fiber
- Good resistance to oils, water, fuels
- Water, Alkalis, Salt Solution : 30kgf/§², 300¡É max
- Organic Solvent : 20kgf/§², 250¡É max
- Hot Oil, Oil Gas, Freon Gas : 30kgf/§² 300¡Émax |
Standard Sizes
- Sheet Size : 1270mm¡¿1270mm / 1270mm¡¿3850mm
1270mm¡¿2540mm / 2540mm¡¿3850mm
- Thickness : 0.5mm / 0.8mm / 1.0mm
1.5mm / 2.0mm / 3.0mm
- Tolerance : Thickness : £¼1mm¡¾0.1mm, ¡Ã1mm¡¾10%
Length : ¡¾50mm, Width : ¡¾50mm |
Technical Data
Description |
Unit |
Value |
Typical values (Thickness 1.5mm) |
|
|
Density |
g/§¨ |
1.5~1.7 |
Tensile Strength |
kgf/§± |
1.4mm |
Ignition Loss |
% |
30 max |
Compressibility |
% |
7~17 |
Recovery |
% |
45s |
ASTM |
Thickness Increase |
% |
10 |
Oil #3 |
Tensile Loss |
% |
30 |
ASTM |
Thickness Increase |
% |
10 |
Fuel B |
Weight Increase |
% |
30 |
Flexibility (F¡Â12) |
- |
No Break |
¡ØAil data are typical values
¡Ø»ó±â¹°¼ºÄ¡´Â ±Ô°ÝÄ¡°¡ ¾Æ´Ñ ´ëǥġÀÓ. |
¾Ð·Â ¿Âµµ ÀÛµ¿ Áöħ
|
Characteristic
°íÇ°ÁúÀÇ ºñ¼®¸é ¼¶À¯¿Í ³»À¯¼º ¹× ³»¿¼ºÀÌ ¶Ù¾î³ °í¹«¸¦ »ç¿ëÇ߱⠶§¹®¿¡ ¿ì¼öÇÑ ÈÇÐÀû ¾ÈÁ¤¼ºÀ» °¡Áø ¾ÐÃà ºñ¼®¸éÆÇÀÌ´Ù.
ƯÈ÷ °í¿ÂÀÇ ¿¼ö, À¯°¡½ºµîÀÇ ±â¸§¿¡¼ ¿ì¼öÇÑ ¹ÐºÀ¼ºÀ» ¹ßÈÖÇÑ´Ù.
High quality non-asbestos fiber and excellent heat-oil resistant rubber are compounded and calendered into a gasket sheet with superior chemical resistance. Especially it shows a good sealing performance under hot oil, oil gas, etc |
Aramid Fiber/¾Æ¶ó¹Ìµå ¼¶À¯
Aramid fiber reinforced gaskets are simply
applied everywhere, So in the chemical industry,
power plants, automobiles, etc. These composite
materials mainly consist of reinforcing
fibers, fillers and rubber, Aramid fibers have considerable influence
on the proccessing of gasket materials and their properties. |
|
|
|
|
|
|
|
|
|
LION SEAL 7600WG/P
¾ÐÃà ºñ¼®¸éÆÇ |
|
|
Typical Physical Propertiese
- Color : Black
- Pressure : 100kgf/§² max
- Temperature : 500¡É max.
- Fibers : Carbon Fiber + Aramid Fiber
- Binder : NBR
- Good resistance to Hot Oil / Fuels / Water
- Suitable for Oils, Water, Fuels, Hot oils, Steam, Salt Solutions, Mild acids and alkalis Coke Making Plant. |
Standard Sizes
- Sheet Size : 1500mm¡¿1000mm / 1500mm¡¿2000mm
1500mm¡¿3850mm
- Thickness : 1.0mm / 1.5mm / 2.0mm / 3.0mm
- Tolerance : Thickness : £¼1mm¡¾0.1mm, ¡Ã1mm¡¾10%
Length : ¡¾50mm, Width : ¡¾50mm |
Technical Data
Description |
Unit |
Value |
Typical values (Thickness 1.5mm) |
|
|
Density |
g/§¨ |
1.7~2.0 |
Tensile Strength |
MPa(kgf/§±) |
17.7(1.8) |
Ignition Loss |
% |
38 max |
Compressibility |
% |
7~17 |
Recovery |
% |
40 |
ASTM |
Thickness Increase |
% |
15 |
Oil #3 |
Tensile Loss |
% |
40 |
ASTM |
Thickness Increase |
% |
15 |
Fuel B |
Weight Increase |
% |
15 |
Flexibility (F¡Â12) |
- |
No Break |
¡ØAil data are typical values
¡Ø»ó±â¹°¼ºÄ¡´Â ±Ô°ÝÄ¡°¡ ¾Æ´Ñ ´ëǥġÀÓ. |
¾Ð·Â ¿Âµµ ÀÛµ¿ Áöħ
|
Characteristic
°íÇ°ÁúÀÇ ºñ¼®¸é ¼¶À¯¿Í ³»À¯¼º ¹× ³»¿¼ºÀÌ ¶Ù¾î³ °í¹«¸¦ »ç¿ëÇÏ¿© ½ÃÆ®³»ºÎ¿¡ ½ºÅ×Àη¹½º ±Ý¸ÁÀ» ³Ö¾î ¸¸µç °í¿Â, °í¾Ð¿¡ ¿ì¼öÇÑ Á¦Ç°ÀÌ´Ù.
This is high quality asbestos free gasket material with stainless steel wire-mesh inserted to be suitable for high temperature and high pressure manufactured by the hot calender process using high quality Non-Asbestos Fiber Oil and Heat-resistant Rubber. |
Aramid Fiber/¾Æ¶ó¹Ìµå ¼¶À¯
Aramid fiber reinforced gaskets are simply
applied everywhere, So in the chemical industry,
power plants, automobiles, etc. These composite
materials mainly consist of reinforcing
fibers, fillers and rubber, Aramid fibers have considerable influence
on the proccessing of gasket materials and their properties. |
|
|
|
|
|
|
|
|
|
LION SEAL-PSB 860
±×¶óÆÄÀÌÆ® ½ÃÆ®
ÆØâ È濬½ÃÆ® |
|
|
|
Ư¡
º» Á¦Ç°Àº ¿ì¼öÇÑ Ç°ÁúÀÇ È濬À» »ç¿ëÇÏ¿© ÈÇÐ °¡°ø °úÁ¤À» °ÅÃÄ ¸¸µç °ÍÀ̱â
¶§¹®¿¡ °í¿Â°ú Àú¿Â, ºÎ½Ä¿¡ °Çϸç À±È°¼º, ¾ÐÃ༺, ȸº¹¼º µî ¼º´ÉÀ»
°¡Áö°í ÀÖ¾î º¼Åؽº Á¦ÀÛÀÇ ÀÌ»óÀûÀÎ Àç·áÀÔ´Ï´Ù.
Expanded Graphite Sheet & Rolls are selected from the high
purity natural flake graphite. They are made through the
advanced chemical treatment and mechanical procedure etc.
This procucts inhance excellent properties such as thermal stable,
with stand high and low temperature, corrosion, resistance.
It has been widely used for die formed packing rings and various
kinds of gaskets. |
½ÃÆ®±Ô°Ý/Sheet Size
¹Ðµµ(g/§¨)
Density |
±æÀÌ(mm)
Length |
Æø(mm)
Width |
µÎ²²(mm)
Thickness |
0.7-1.2 |
¡Â1000 |
¡Â1000 |
0.2-0.3 |
|
·Ñ ±Ô°Ý/Roll Size
¹Ðµµ(g/§¨)
Density |
±æÀÌ(mm)
Length |
Æø(mm)
Width |
µÎ²²(mm)
Thickness |
0.7-1.1 |
30-100 |
¡Â1000 |
0.2-0.8 |
|
Àû¿ë¹üÀ§/Service Rnage
¿Âµµ/Temperature(¡É)
|
¾Ð·Â(kgf/§³)
Pressure |
PH¹üÀ§
PH Range |
»êȼº±âü
In oxidizing atmosphere |
ºñ»êȼº±âü
In non oxidizing atmosphere |
-240 -450 |
-240 -3500 |
30 |
0-14 |
|
Áֿ伺´É/Main Properties
Ç× ¸ñ |
¥°Classl |
¥±Classl |
¹ÐµµÇã¿ëÄ¡/Tolerance of density(g/§¨) |
¡¾0.05 |
¡¾0.06 |
µÎ²² Çã¿ëÄ¡/Tolerance of thickness(§®) |
¡¾0.03 |
¡¾0.04 |
ź¼ÒÇÔ·®/Carbon Content(£¥) |
99.5 |
98 |
¾ÈÁ¤·Â/Tensile strength(Mpa) |
¡Ã4.5 |
¡Ã4.5 |
¾ÐÃà·ü/Compressibility(£¥) |
£¾40 |
£¾40 |
º¹¿ø·ü/Recovery(£¥) |
£¾10 |
£¾10 |
À¯È²ÇÔ·®/Sulphur Content(PPm) |
£¼700 |
£¼1000 |
¿°¼ÒÇÔ·®/Chlorine Content(PPm) |
£¼35 |
£¼50 |
¾ÐÃຯÇüÀ²/Stress relaxtion rate(£¥) |
10 |
10 |
¿¼Õ½Ç·®/Ignition Loss(£¥) |
£¼0.5 |
£¼1 |
|
|
|
|
|
|
|
LION SEAL-GTR 958
GAR 921
°í° È濬 º¹ÇÕÆÇ |
|
|
|
Ư¡
º» Á¦Ç°Àº ÆØâÈ濬½ÃÆ®¿Í °¢Á¾ ºÎµ¿ÇÑ ÀçÁúÀÇ ±Ý¼ÓŸ°øÆÇ, ±Ý¼ÓÆòÆÇ, ȤÀº
±Ý¼Ó¸ÁÀ¸·Î °áÇÕµÇ¾î ¸¸µé¾îÁø °ÍÀÔ´Ï´Ù. ¿¿ÂÁ¤¼º, °í°µµ µî Ư¡À»
°®°í ÀÖ¾î °í°º¼Åؽº, °í±â¾Ðº¼Åؽº Á¦ÀÛ¿¡ ÀûÇÕÇÕ´Ï´Ù.
This products is comprised of Expanded Graphite Sheet and various steel
sheets such as tanged, flat, or mesh. It has character of thermally
stability, high strength and no cold flow, etc. It is an ideal material
of all kinds of reinfoced graphite, engine head gaskets, etc. |
½ÃÆ®±Ô°Ý/Sheet Size
Á¾·ù/Style |
±æÀÌ/
Length(mm) |
Æø/
Width(mm) |
µÎ²²/
Thickness(mm) |
Ÿ°øÆdz»Àå½ÃÆ®
Reinforced Tanged Insertion |
¡Â1000 |
¡Â1000 |
1.0-3.0 |
±×¶óÆÄÀÌµå º¹ÇÕÆǽÃÆ®
Flat Adhesive bond Insertion |
¡Â1000 |
¡Â1000 |
0.8~3.0 |
|
|
Àû¿ë¹üÀ§ Service Range
Á¦Ç°¹øÈ£/NO |
³»Àå°ÈÀçÁú
Reinforced Inserted Material |
±¸Á¶
Construction |
¾Ð·Â(N/§±)
DIN 52913
stability Under Compressive stress |
¿Âµµ/Temperature(¡É) |
»êȼº
In oxidizing Meida |
ºñ»êȼº
In Non oxidizing Meida |
GTR C-958 |
öŸ°øÆÇ
Tanged Carbon Steel Sheet
(µÎ²²/
Thickness 0.20~0.25mm) |
|
¡Ã48 |
-10 -450 |
-10 -500 |
GTR B-958
GTR A-958 |
SS304, 316 ½ºÅÙŸ°øÆÇ AISI304, 316 etc. Tanged stainless steel Sheet
(µÎ²²/
Thickness 0.1mm) |
|
¡Ã48 |
-240 -450 |
-200~560
(SS304)
-200~870
(SS316) |
GAR A-921
GAR B-921 |
SS304, 316 ½ºÅÙÆòÆÇ AISI304, 316 etc. Tanged stainless steel Sheet
(µÎ²²/
Thickness 0.05mm, 0.1mm) |
|
¡Ã45 |
-240 -450 |
-200~560
(SS304)
-200~870
(SS316) |
GAR M-921
|
SS304, 316 ½ºÅÙ±×¹°ÆÇ AISI304, 316 etc. stainless steel mesh |
|
¡Ã40 |
-240 -450 |
-200~560
(SS304)
-200~870
(SS316) |
GAR P-921
|
°ÈÆú¸®¿¡½ºÅÚÆÇ
Mylar Reinforced
(µÎ²²/
Thickness 0.05mm) |
|
¡Ã40 |
-240 -450 |
-200~1650 |
¾ÐÃàÀ²(%)
ASTM F36A-66
Compressibility |
º¹¿øÀ²(%)
ASTM F36A-66
Recovery |
±âüħÅõÀ²
DN3535
Gas Permeability
(µÎ²²/Thickness 1.5mm) |
¹ÐºÀ¼º(F-37B)
SALABILITY
(µÎ²²/Thickness 1.5mm) |
Áú¼Ò/N2
(ml/hr) |
¿¬¼ÒÀ¯(ml/hr)
Bumming Oil A |
30-35 |
15-20 |
¡Â0.8 |
30 |
£¼0.5 |
30-40 |
15-30 |
¡Â0.8 |
60 |
£¼0.5 |
40-50 |
10-15 |
¡Â0.4 |
35 |
£¼0.5 |
30-35 |
15-20 |
¡Â1.0 |
7000 |
58 |
40-50 |
10-15 |
¡Â0.4 |
65 |
0.2 |
|
|
|
|
|
|